Slideways Expands their Mounted Unit Line!

Slideways offers a complete line of flange and pillow block mounted units. Available in 2 bolt, 3 bolt and 4 bolt flange units as well as 2 bolt pillow blocks.

We offer the following inserts:

  • UHMW
  • Cast Nylon
  • Stainless Steel Ball Bearings
  • Chrome Steel Ball Bearings
  • Acetal
  • PTFE
  • Other Plastics for special applications
  • End caps are standard
  • Other housings are available

 

Advantages of the Slideways Mounted Products:

  • Interchange with traditional cast iron housings
  • Stainless Steel sleeves available for shaft protection and positive locking
  • Meet FDA and USDA standards
  • Patented yellow Lube strip increases PV 40%
  • Standard End caps protect from contamination
  • Housing sizes 204-208
  • Bore sizes 3/4″ to 1 9/16″
  • Corrosion and Moisture resistant
  • Self lubricating and maintenance free
  • Other inserts available for special applications

Metal Pillow Block Bearings and Flange Units with Plastic Inserts

Slideways produces a standard line of light duty 2-bolt pillow blocks, 2-bolt flanges and 4-bolt flanges, extensively used in conveyor systems. Each of these bearing types is available with inserts of many different materials. Our standard product range includes inserts made of wood, UHMW and oil-filled UHMW.

Common Applications for Pillow Blocks and Flange Block Bearings:

  • Chemical environment
  • Corrosive environment
  • Washdown conditions
  • Where lubrication is difficult

Self-Aligning Inserts Fit Most Plastic Pillow Block Bearings and Flanges

Also available from Slideways are self-aligning bearing inserts that will fit most cast iron, stainless and plastic pillow blocks and flanges. These inserts are available in a variety of materials. Our standard line includes UHMW, oil-filled UHMW, oil-filled Nylon and Nylatron NSM. These inserts are produced to fit in the standard 201 to 208 series pillow blocks and flanges.

2-Bolt Flanges

Slideways 2-bolt flanges are available in bore sizes from ¼” to 1 1/8”.  While standard housings are galvanized steel, stainless steel is also available in bore sizes from ¼” to 1”.  Inserts are made of wood, UHMW and oil-filled UHMW. These 2-bolt flanges are great for applications that experience chemicals and corrosive solutions often found in washdown conditions.

4-Bolt Flanges

Slideways 4-bolt flanges are available in bore sizes ranging from ½” to 1-1/2”. Standard housings are galvanized. Stainless steel is available in bore sizes ranging from 1” to 1-1/2”. Inserts are made of wood, UHMW and oil-filled UHMW. These are great for applications that experience chemicals and corrosive solutions often found in washdown conditions.

2-Bolt Split Housing Pillow Blocks

Slideways’ 2-bolt pillow blocks are available in bore sizes ranging from ¼” to 1-1/2”. Standard housings are galvanized steel. Stainless steel housings are available in bore sizes ranging from ½” to 1”.  Slideways produces these split housing pillow blocks with solid and split inserts. The split inserts allow for easy installations in mid-shaft locations, saving the time and money of disassembly.

Mounted units for extreme wash down environments

View and Save Additional Info on Metal Mounts and Plastic Bearing Inserts!

Interested in finding out more information, about this specific section? Click the buttons below to download this section of our catalogue; or if you would like to download our entire catalogue.
Download This CatalogDownload Entire Catalog